I need to replace the end cap on a PVC pipe. The current cap is just a standard PVC cap that I can find at Home Depot for 50 cents. However, none of them have 1/4" threaded holes. I am not ...

A common pitfall here is forgetting to account for the 3/4 to 1 inch of pipe that goes inside the fitting ... Step 2: Deburr the pipe. The process of cutting through PVC usually leaves small ...

That’s because there’s no need for that type of joint when plumbing, the intended purpose of the PVC pipes. But [John] tipped us off about FORMUFIT PVC Fittings ... onto a pipe and can ...

If you just need to make a simple bend, you can do so without using elbows or fittings. A hair dryer ... to see how well this trick works on 1-2" PVC pipe.

AmJohnny has shared an Instructable for bending PVC pipe, using a hair dryer and 1/2-inch drain auger. The drain auger is inserted into the PVC to prevent it from kinking as it's being bent ...

The physical assembly is pretty simple. The whole structure is made from 1/2″ PVC pipe and fittings and is broken into four nearly identical sensor modules. The sensors have an electrode on ...

The new PVCO product line reinforces our commitment by employing new manufacturing technologies that improve environmental footprints while enabling high performing PVC pipe and fittings for our ...