But there's one area that is often ignored when building a bombproof modern Dana 60 front axle: ball joints. Actually, when a U-joint or CV fragments, it's the kind of breakage that most closely ...

Your CV joint has failed ... you can use a crowbar or a "pickle fork" puller. Disconnect the ball joint from the suspension upright. You probably can do this by loosening and then removing ...

The CV joint assembly consists of two universal joints unified by a small ball and socket that pivots at the center of the joint. Using two joints allows one to rotate in a fixed position on the ...

It uses a grooved inner shell with ball bearings to guide the outer cover over varying articulation angles. The inside of a CV joint is packed in grease to lessen friction as the bearings guide ...

the axle must be removed and one or both CV joints separated from the axle shaft. Axle removal typically requires separating the lower ball joint and pressing the outer end of the drive shaft ...

The VL3 CV joint is made of a monobloc tubular shaft ... with track geometry of the splines utilizing four pairs of opposed ball tracks (instead of the standard three), giving it more torque ...