The CPU pump fan goes into the CPU_FAN or similar header, usually at the motherboard's top. The ARGB fan cable will go into a ...

The graphics card in question was a GTX 960 (what a card!), and in 3DMark Fire Strike it reached 40 °C with the default ...

Sometimes when changing the CPU around, or swapping the CPU cooler, it can take it a bit longer to post, so don't fret if it takes a minute. You might need to reset your BIOS, too, but that's not ...

Finally, make sure your CPU cooler is plugged into the power header(s) on your motherboard, including all the fans as well as the pump unit if you're using an AIO cooler. If your motherboard has a ...

Some motherboards may provide more power via CPU OPT than via CPU FAN. For this reason, it is recommended to check the manual of your motherboard to see if you can benefit from additional power.

Once the cooler is installed, connect the fan to the CPU cooler header on your motherboard. It will be a three or four pin header and will usually be designated CPU_FAN or similar. Step 5: Test it out ...

This could damage the CPU, the motherboard, or both. The bottom line is this: if your heatsink or liquid cooler has its own backplate, don't use it with Socket AM5.

The more powerful your CPU is, the bigger and better cooler you'll need, but rest assured our ... to your case via 8 or 12 screws than with a huge chunk of metal hanging off your motherboard. ...