Q: The screws in the top hinge of my entrance door have become so loose they can no longer be tightened, causing the door to sag so that it is difficult to close. How can I repair this? A: There ...

Remove nails, staples or screws from the loose joint and scrape away old glue with a utility knife. Predrill 1/16-in. holes for nails ... with a tiny drop of thread adhesive like Thread Lok.

A loose door hinge is annoying enough, but it’s even worse when you’ve tried to screw it back in before realizing the holes are stripped ... are hanging on by a thread, but if they’re ...

One of the bathrooms has a towel rack that is hanging on by one screw; the other screw ... Drill a small hole in the center of the wood and thread a string through it. Knot the string or tie ...

A loose screw or broken frame can be ... falls out and you don't have a replacement, you can thread dental floss through the screw hole and securely tie a knot to keep the temple arm in place ...

But eventually they'll twist loose again. A permanent fix is to use a thread adhesive such as Loctite ... One direct cause of this could be that your screw holes for the hinges are stripped.

Q-Please tell us how to keep the screws in our steel ... where a loose fastener could cause accident or injury. A simple solution is to coat the threads of the loose fastener with a vibration ...

an adhesive that is applied to screws and other fasteners to prevent them coming loose. Available in a variety of strengths, thread-locking fluid is great at keeping screws where they need to be ...

The Heli-Coil insert is a clever idea where you drill out the damaged threads, tap the hole, and screw in the precision ... 21.The steel plug has been broken loose and is ready to come out.

This certainly includes tightening a screw of a clubhead that has become loose. Turn, turn, turn as needed. My driver head shattered on the 8th hole during a recent round. At the turn, I ducked ...

threaded panel holes used in conjunction with a screw that has an externally relieved shank, a long groove between the head and threads; or a ferrule or sleeve that is pressed, threaded ...