Metal standoffs are usually hexagonal in shape and screw into the base plate of the computer case. Metal standoffs also contain a hollow, threaded cavity in which you insert screws to secure the ...

Nearly all screws in a computer case require this cross-head screwdriver. Any Phillips #2 screwdriver will do—be it the plain, trusty Craftsman in your toolbox, the fancier ratcheting type with ...

Also, when tightening the screws to the standoffs, don't go overboard. ... Breadboarding is the practice of assembling the core components of a PC and testing the build outside the case.

Be sure to use your motherboard’s standoff screws so it doesn’t directly touch the case wall. If you forget to use your standoffs, you risk frying the motherboard when you power up your PC.

{502 Piece Kit} The Bolt Dropper PC screw kit contains more of the most used screws, nuts, washers, and computer case thumb screws than others. This way you don’t run out during your build or ...

The last motherboard I tried to install got screwed up because I think I installed it in the case wrong. The motherboard nor the case came with screws to put in. <P>My question is this:<BR>What ...

There are probably more holes on your case than there are on your motherboard, so note which ones these are, and grab your motherboard standoffs from your bag of screws (they have a male screw end ...

“It might be your motherboard shorting against the computer case. Make sure that you have standoffs installed, if needed, and that you don’t tighten the screws that hold the motherboard in ...

The Corsair Nautilus 360 RS has two major strengths, both of which are dependent on the PC build they go into. First, the tubes are longer than most at 450 mm, which can solve an issue present in ...