Install the flow restrictor. For some models of fill valve (including this one), there are a handful of flow restrictors that come with it in several colors: black, brown, clear, gray, blue, etc.

The fill valve is what controls the amount of water that goes into the tank. Use a screwdriver and turn the screw clockwise to bring more water into the tank. Then, flush to see if it is working ...

Ideally, the water level in the toilet tank should be 1 to 1.5 inches below the top of the overflow tube (also called an overflow pipe), an open-ended tube centrally located in the tank. When the ...

Pull the old fill valve out. Use it to set the height of the new fill valve. (The top of the valve should be about three inches above the overflow pipe.) Set the new fill valve into place in the tank.

For homes built on a slab, your water main shut-off valve is likely close to your water heater tank —check underneath it or at the top. Your house water valve should also be documented on your ...

HONOLULU (HawaiiNewsNow) - A new EPA investigation found numerous problems with the military’s water distribution system for 93,000 people around Pearl Harbor, issues that may violate federal ...

Overflow by a water tank on Norrbom Road June 25 resulted in damage and erosion to sections of the Sonoma Overlook Trail. City Public Works Operation Manager Chris Pegg told the Index-Tribune that ...

A huge underground water tank has been made to protect residents from flooding and sewage spills going into rivers in Stroud. The storm overflow tank is the largest of its kind in the UK and can ...