Nov 27, 2016 · Dana 44 Cover - Differential Covers - Spyntec Industries LLC. I like the Teraflex and AEV covers but I have not found a good price on those. Any feedback on these or other brands is also appreciated as well as if there are any specials going on …

Nov 7, 2021 · The Dana lower hole appears to be in the exact same spot as the upper hole on the AEV cover. Also, this makes sense because Dana makes specific part #s for front and rear whereas it looks like AEV only makes a generic dana 44 one. FYI @2katz Part of me wants to just go buy a set of stock covers so I don't have to worry about this LOL

Jun 12, 2016 · 2) If you are using RTV to seal the diff cover, make sure to keep it out of the bolt holes. Only a very small bead is needed - do not over-apply the RTV. 3) For heavy cast iron covers (like on my Prorock 44), I use two bolts about 2" long with the heads cut off to act as guide pins for installing the cover.

Nov 9, 2020 · Dana Spicer 34279 Diff Cover BOLT 5/16-18 hex head fits Dana 44 solid front axle ... ProRock 44, AEV 2 ...

Dec 22, 2014 · Hi Perry, I have 2015 JKUR and recently changed the Differential covers with ARB44. There is substantial rubbing with the factory front Track Bar. What I noticed is that the ARB logo is actually responsible for the rubbing as it comes out about 3/4 inch of the cover, so I had to cut it off in order to avoid the impact.

Dec 6, 2017 · I have a Dana 44 rear Teraflex diff cover. I was comparing it to the stock cover and noticed the fill hole location is much lower than the stock one. If I only fill it to the fill level it won't be high enough to allow oil to enter the axle tubes to lubricate the axle bearings.

Aug 4, 2021 · 2018 Jk 2 door with tereflex 1.5 puck leveling kit. Rear has the Oscar Mike/Recon heavy duty cover on the Dana 44 but want to replace front differential cover on the Dana 30 front for more protection.

Jan 22, 2021 · Does anyone have experience running the Dana Spicer 30 & 44 Diff Covers? I'm also looking at ARB and Adventek, which appears to be the same as the Spicer (16 JKU, 2.5-inch JKS Lift) Need to change my fluids before my March Moab trip and figured now is the time to swap out the stock covers thx

Sep 26, 2018 · The other differences are less noticeable. If you look at the fill plug on the D44, you will noticed a raised flat portion of the diff cover, and the fill plug sits close to the bottom edge of that portion. Also notice how the bottom edge is relatively parallel with the ground.

May 25, 2020 · Product Details: Dana 44 low pinion and high pinion differential cover kit Nodular iron High fill plug Drain plug Color gray Parts Included: (10) bolts (1) Spicer RD52000 performance reusable gasket (1) nodular iron differential cover Fits: Dana 44 axles Brand: Dana Spicer Part Number: Dana...